The project gives a custom component for intefacing PSoC4 BLE device with SD card similar to PSoC3/5LP.
The project gives details on how to inteface MPU6050 3-axis gyroscope and a 3-axis accelerometer combined module with PSoC6.
The project shows how to design using the same USB to enumerate as two COM PORT Terminal.
The project gives a short description on how to design a USB design which would enumerate as an HID, COM PORT and audio devices.
In this project, RTC is synchronized to BLESS interrupts to update every one second, instead of using a WDT interrupt.
Monitor what happening in the baby room when we are not present there and send an SMS to the parent when motion is Detected.
Using PSoC and LinkIt ONE send analog sensor values to Blynk and then, with the power of IFTTT control your smart devices based on the data!
Sensing office conditions, this device can automate and save energy and time.
Automated system to cultivate and guarantee adequate conditions for the growth of flowers, maintaining parameters of humidity and heat.
Measurement of the oxygen saturation in the bloodstream as well as the heart rate and a pedometer. The data will be sent to a Android app.
Car controlled by arms muscles movements using electrodes placed on the body. The car responds with four different commands using RF.
System of door opening with password for notes of flute using Matlab to interface and communication Bluetooth.
The next part for this project is making the DC motor move to a desired position.
This Code Examples demonstrates bootloading a PSoC4 device from an External EEPROM.
GLCD component is made available in PSoC4. EmWin library is ported to PSoC4.
This project will be a tutorial for how to build a variety of long range wireless sensors and how to integrate these sensors.
Or connect with your social account:
New here? Create an account