This example demonstrates how to use TFT Display and CapSense® on the CY8CKIT-062-WiFi-BT PSoC® 6 WiFi-BT Pioneer Kit using WICED® Studio.
Our world gets binary and hectic. This CyWordClock describes the actual time by words using individual configurable RGB illumination.
This is a custom PSoC component to drive the nRF24 radios!
The title says it all - blinking the onboard LED.
This project demonstrates the interface of US-100 Ultrasonic sensor with PSOC4 BLE to get the distance measured value in centimeters.
Nursing call for care and attention of patients, with Visual, luminic and sound alarms. Prototype for 3 bedrooms, expandable to more rooms.
Just an easy measurement PIR motion sensor and display it in a Nokia LCD
Idea is to use the Analog Coprocessor Pioneer Kit which could be use for car interior occupancy detector to protect young passengers.
This system sends alerts to your smartphone when there is movement in the house, also allows monitoring the temperature of the place.
Control the parameters of temperature, humidity, lighting and check the access to the crop to automate the process.
Define the optimum environment for sleep by applying ML to sensor data.
FM0 acts as an SPI master and PSoC4 as an SPI slave. FM0 will collect user input from a GPIO and SPI master sends out strings to SPI Slave.
PSoC4 acts as an SPI master and FM0 as an SPI slave.
Demo of I2C serial coms between the PSoC Analog Coprocessor Pioneer Kit as master and an Arduino UNO as slave.
A universal Bluetooth remote controlled LED chandelier. Works with any serial command over Bluetooth to turn ON/OFF the lights!
A very complex control system used a lot in education, because it's composed of two unstable processes: a DC motor and a rolling ball.
An analog heavy system that detects leakage of NG (Methane) from stoves, gas cylinder tubes inside kitchen and generates audiovisual alerts.
A great way to save resources (pins) and make a device with plenty of configurations and information in different screens.
A very simple example of Hbridge DC motor control, Joystick ADC reading and offset calibration.
Easy and optimal way to write and read data in the EEPROM memory of PSoC5LP.
This project shows the working of Self-Capacitance and Mutual-Capacitance sensing methods in one project using CY8CKIT-040.
An alternative way of writing to a standard LCD using only 6 pins instead of 10 (4 databits) and save pins for your design.
A 0-15 psi analog pressure sensor made using the PSoC Analog Coprocessor and TE's pressure sensor.
Running short on pins? Don't waste pins, work with a I2C LCD instead.
Or connect with your social account:
New here? Create an account