This example demonstrates how to use TFT Display and CapSense® on the CY8CKIT-062-WiFi-BT PSoC® 6 WiFi-BT Pioneer Kit using WICED® Studio.
Sensorless BLDC motor project available with CY8CKIT-037 kit example, ported to PSoC6 device.
This is a custom PSoC component to drive the nRF24 radios!
Bit banging implementation of 1 Wire interface between PSoC 4 and DS18B20 digital thermometer.
The title says it all - blinking the onboard LED.
24/7 monitoring with CY8CKIT-048 PSoC® Analog Coprocessor Pioneer Kit and a Raspberry Pi
Measurement of the oxygen saturation in the bloodstream as well as the heart rate and a pedometer. The data will be sent to a Android app.
This code example demonstrates the interfacing of PSoC 4200 pioneer kit with MB39C031-EVBSK-01 evaluation kit.
Demo of I2C serial coms between the PSoC Analog Coprocessor Pioneer Kit as master and an Arduino UNO as slave.
This project demonstrates communication between PSoC 4M and FM4 over LIN. PSoC 4M acts as LIN Slave and FM4 acts as LIN Master.
POC for interfacing with single wire communication protocol based DHT11 and DHT22 devices for logging temperature and Humidity using PSoC 4.
A great way to save resources (pins) and make a device with plenty of configurations and information in different screens.
A very simple example of Hbridge DC motor control, Joystick ADC reading and offset calibration.
Code Examples show how Filter can be configured for 16 bit signed operations and 24 bit operations.
Project describes I2C communication between FM4 Master and PSoC 4 Slave with UART log for demonstration.
Easy and optimal way to write and read data in the EEPROM memory of PSoC5LP.
This Code Examples demonstrates bootloading a PSoC4 device from an External EEPROM.
GLCD component is made available in PSoC4. EmWin library is ported to PSoC4.
This project shows the working of Self-Capacitance and Mutual-Capacitance sensing methods in one project using CY8CKIT-040.
Project demonstrates interface between FM0+ SK-FM0-100L-S6E1B8 starter kit and FRAM FM24V10.
An alternative way of writing to a standard LCD using only 6 pins instead of 10 (4 databits) and save pins for your design.
This project demonstrates PSoC Analog Coprocessor design to implement a non-contact temperature measurement using thermopile sensor.
A very simple way to store data in your programs even after the device is shutdown, in a very simple way to make it work.
A very simple interface for debugging or operating an embedded system can be easily configured with UART. Works great for data acquisition.
Or connect with your social account:
New here? Create an account