A Halloween Pumpkin was equipped with PSoC 4 BLE. Ghosts are detected by PIR & Proximity sensors, forcing light show and sound from SD-card.
This project demonstrates the interface of US-100 Ultrasonic sensor with PSOC4 BLE to get the distance measured value in centimeters.
Example (including library) of using ST's VL53L0X ToF sensor for distance measurement with PSoC4.
Smart trailers and intermodal containers data logger.
The project gives details on how to inteface MPU6050 3-axis gyroscope and a 3-axis accelerometer combined module with PSoC6.
Want a cheap and awesome smart robot car? Why not buy an RC car and convert it? This project shows how to hack the hardware and get control.
Car controlled by arms muscles movements using electrodes placed on the body. The car responds with four different commands using RF.
This code example demonstrates the interfacing of PSoC 4200 pioneer kit with MB39C031-EVBSK-01 evaluation kit.
The project gives a custom component for intefacing PSoC4 BLE device with SD card similar to PSoC3/5LP.
This example demonstrates how to use TFT Display and CapSense® on the CY8CKIT-062-WiFi-BT PSoC® 6 WiFi-BT Pioneer Kit using WICED® Studio.
Sensorless BLDC motor project available with CY8CKIT-037 kit example, ported to PSoC6 device.
The project shows how to design using the same USB to enumerate as two COM PORT Terminal.
The project gives a short description on how to design a USB design which would enumerate as an HID, COM PORT and audio devices.
This sleek machine can mix juice cocktails or real ones (age permitting) on command and looks great on your counter.
System of door opening with password for notes of flute using Matlab to interface and communication Bluetooth.
A small battery-less Bluetooth Low Energy LCD display that can be controlled using a smartphone app at any given time.
This code example demonstrates controlling brightness of an LED on FM4 Kit using Capsense on PSoC4BLE Kit. Here PsoC4 acts as I2C Master.
Demo of I2C serial coms between the PSoC Analog Coprocessor Pioneer Kit as master and an Arduino UNO as slave.
A 4 line x 32 character Braille display and keyboard for the Blind.
This is a sample project to perform Writes and Reads with an SD card using FM4. The project is without using any File System.
A solution developed for increasing the productivity of urban growhouse.
Setting up a LoRa peer-2-peer communication by using CY8CKIT-062-BLE with Arduino Shield (Dragino LoRa, RFM95W).
Getting started with LoRaWAN for Cypress PSoC 6 MCU based on LMiC to access to LoRaWAN TTN (The Things Network) using Dragino LoRa, RFM95W.
This project is designed to interface WS2812 LED ring with PSoC Cap Sense for gesture recognition of clockwise/counterclockwise movement.
Or connect with your social account:
New here? Create an account